How to calculate commercial real estate rent

A hand sets stacks of silver coins on the tiled floor of an empty office while a woman with a handbag watches
Uriel Manseau

CTO, Sphera Credit

B.Eng., M.Sc. Applied Mathematics

Reviewed by Joseph Edelmann, CEO, Sphera Credit

8 min read

How do you calculate commercial real estate rent?

To calculate commercial real estate rent, multiply the rentable square feet by the yearly rate per square foot, then add the tenant's share of operating costs when the lease is net. Divide the yearly total by 12 for the monthly payment. The US General Services Administration (GSA), which leases office space for federal agencies, has the government pay "annual rent, payable in monthly installments in arrears" (GSA, Lease L100).

The calculation runs in five steps:

  1. Find the rentable area. Rentable square feet (RSF) is "the area for which a tenant is charged rent", in the words of GSA's standard lease. It adds a share of lobbies, corridors and restrooms to the space you occupy.
  2. Check the unit of the rate. A listing quotes the rate per square foot per year or per month.
  3. Multiply. 2,000 RSF at $30 a year comes to $60,000 a year, or $5,000 a month. This figure is the base rent, also called minimum rent.
  4. Add the costs the lease passes through. Under a triple net lease, the tenant pays a share of property taxes, insurance and maintenance on top of base rent.
  5. Apply the changes over the term. Escalations, free months and percentage rent move the figure from year to year.

Our leasing guide compares a gross quote and a triple net quote for the same office suite.

Is commercial rent quoted per month or per year?

Both conventions exist, and the two figures differ by a factor of 12. Convert the quote before you compare two spaces:

Quote on a 2,000 RSF spacePer square foot per yearPer square foot per monthMonthly rent
$30.00 a year$30.00$2.50$5,000
$2.50 a month$30.00$2.50$5,000
$24.00 a year$24.00$2.00$4,000

What rate per square foot should you use?

The rate comes from comparable leases: the same market, property type and building class. GSA posts its whole lease inventory each month (GSA, lease inventory). In its October 2026 file, fully serviced office leases paid a median $30.66 per RSF a year, and the middle half paid between $24.36 and $39.02. Warehouse leases paid a median $17.73.

US federal leases in October 2026: 6,076 fully serviced office leases at a median $30.66 per rentable square foot a year and 220 warehouse leases at $17.73, annual rent rising in line with area

Source: U.S. General Services Administration, lease inventory, October 2026: fully serviced leases that are all office (6,076) or all warehouse (220); Sphera Credit calculation of rent per RSF.

Each dot is one lease. The dots climb with area because rent equals area times rate, and their spread around each line shows how far rates vary between leases. Treat a national figure as a range, and price a suite from leases signed nearby. Brokers read the direction of local rents from vacancy and net absorption in commercial real estate.

What goes into the rent on a commercial lease?

A commercial lease's rent bundles several parts, each priced per rentable square foot: the base rent for the space, the operating costs, the repayment of any improvement allowance, and parking where the lease charges for it. GSA's standard lease lists them as separate lines: shell rent, operating costs, tenant improvements rent, building specific amortized capital and parking (GSA, Lease L100). Together they make the total annual rent.

Shell rent is the base rent for the space itself. Operating costs pay for running the building: cleaning, maintenance, utilities and management.

GSA's lease gives an example of the common area factor: 11,500 RSF over 10,000 usable square feet makes a factor of 15%. GSA calls the usable figure ANSI/BOMA Occupant Area (ABOA). The rates and the allowance below are assumptions for the arithmetic:

Rent lineRateAnnual rent
Shell rent$24.00 per RSF$276,000
Operating costs$7.50 per RSF$86,250
Tenant improvements rent$40 per usable sq ft, repaid over 10 years at 6%$53,290
Total annual rent$36.13 per RSF$415,540
Monthly installment$34,628

The improvement line repays the landlord's fit-out money like a loan: $400,000 over 120 monthly payments at 6% a year costs $4,440.82 a month. In GSA's template, the improvement line drops to zero after the firm term. The page on how tenant improvement amortization works covers that repayment.

How is additional rent calculated in a net lease?

Additional rent is everything the tenant pays the landlord beyond base rent. Writing for the Canadian Franchise Association, a franchise lawyer describes additional rent, common area maintenance rent (CAM) and TMI as "all of the extra amounts the tenant must pay to the landlord" (Canadian Franchise Association). TMI stands for taxes, maintenance and insurance, the Canadian name for the costs a US lease calls the nets.

A tenant's share is usually its rentable area divided by the building's. GSA's lease derives the government's Percentage of Occupancy by dividing the government's rentable square feet by the building's. The suite above, in a 92,000 RSF building, holds 12.5%.

GSA's lease applies that share to tax increases: it multiplies the government's share by the gap between the current year's real estate taxes and the base year's. When the building's taxes rise $40,000 above the base, the suite's rent rises $5,000. The CAM page shows how to calculate CAM charges the same way.

How do rent escalations change the rent each year?

An escalation clause raises the rent during the term. FedDev Ontario lists regular increases, pro-rated increases in taxes and direct costs, and "Automatically raising the rent according to the Consumer Price Index (CPI) or some comparable index of inflation" (FedDev Ontario).

GSA's lease indexes one line only. Beginning with the second year, the adjustment comes from "multiplying the base rate by the annual percent of change in the Cost-of-Living Index", which the lease sets as the CPI for Urban Wage Earners and Clerical Workers (CPI-W). The base rate is the operating cost base, so shell rent keeps its rate.

On the suite above, a 3% rise in the index adds $0.225 per RSF, or $2,587.50 a year. Applied to the whole rent, the same 3% would add $12,466. FedDev Ontario advises tenants to pay at most "a portion of the annual CPI increase, especially if the lease already contains increases for taxes and direct operating costs".

How is percentage rent calculated in a retail lease?

Percentage rent equals an agreed percentage of the tenant's gross sales above a breakpoint, paid on top of the minimum rent. The US Office of the Comptroller of the Currency (OCC), which supervises national banks, notes that "Anchor tenants may pay a flat rate plus a percentage of their annual sales (percentage rent)" (OCC handbook). FedDev Ontario calls percentage leases "a special type of rental arrangement for retailers in multi-tenant locations such as malls or shopping centres".

The breakpoint is the sales level where percentage rent starts. The Canadian Franchise Association article puts it plainly: "A natural breakpoint is calculated by dividing the minimum rent by the percentage rent rate." In its example, a $100,000 minimum rent at 5% gives a breakpoint of $2,000,000 in gross sales. Sales of $3,000,000 then add $50,000 of percentage rent.

An artificial breakpoint is any other level the two sides agree on. The same article says it "can be higher or lower than the natural breakpoint, and will be negotiated by the tenant and the landlord." The table runs the example at four sales levels, with an artificial breakpoint of $2,500,000 for comparison:

Annual gross salesPercentage rent, natural breakpointTotal rent, natural breakpointTotal rent, $2,500,000 breakpoint
$1,500,000$0$100,000$100,000
$2,000,000$0$100,000$100,000
$2,500,000$25,000$125,000$100,000
$3,000,000$50,000$150,000$125,000

Above a natural breakpoint, the total rent equals the rate on every dollar of sales: $150,000 is exactly 5% of $3,000,000. So the tenant pays the greater of the minimum rent or 5% of sales. A higher artificial breakpoint lowers the percentage rent at every sales level above it.

Two more terms decide the bill:

  • The definition of gross sales sets which receipts count toward the breakpoint.
  • The payment schedule sets when the percentage rent falls due. The CFA article notes that percentage rent "may be payable on a monthly, quarterly, or annual basis".

What do people get wrong when they calculate commercial rent?

Four errors recur: dividing the common area by the wrong figure, reading a monthly rate as a yearly one, assuming a gross rent covers every cost, and taking the quoted rate for the cost of the lease. Each one changes the rent by more than a rounding error.

How do you calculate a load factor correctly?

The common area factor (CAF), also called the load factor, converts usable area into rentable area. GSA's lease expresses it as the difference between rentable and usable square feet, divided by the usable area. To find the RSF, the lease multiplies the ABOA area by one plus the CAF.

Divide by the usable area. A floor of 100,000 rentable square feet with 10,000 square feet of common area leaves 90,000 usable. Its factor is 10,000 ÷ 90,000, or 11.1%. Dividing by the whole floor gives 10% and understates the area. A 1,000 square foot suite then measures 1,111 RSF, and at $30 it pays $33,330 a year.

What happens if you read a monthly rate as a yearly one?

The rent comes out 12 times too low. On 2,000 RSF, a rate of $2.50 a month costs $5,000 a month. Read as $2.50 a year, the same quote looks like $417 a month.

Does a gross rent cover every cost?

A gross rent covers the costs its lease lists, and utilities are a common exception. FedDev Ontario notes that "Many landlords charge tenants separately for heat and electricity." The page on what a gross lease includes explains full service and modified gross leases.

Is the quoted rate the cost of the lease?

The quoted rate prices one year of one square foot. Free months, the improvement allowance and the length of the term set what the lease costs. The letter of intent page totals base rent over a five and a ten year term. Brokers compare offers with net effective rent on a commercial lease, which spreads the concessions over the term.

Frequently asked questions

Divide the annual rent by the rentable square feet. A lease of 2,000 rentable square feet at $60,000 a year costs $30 per square foot a year, or $2.50 a month. Use the rentable area the lease names, because that is the area the rent is charged on.

Sources

  1. Global Lease Template L100 (May 2026) — U.S. General Services Administration (checked 2026-11-20)
  2. Realty and lease acquisition overview: monthly lease inventory — U.S. General Services Administration (checked 2026-11-20)
  3. What do I need to know about different types of rent under a retail lease? — Canadian Franchise Association (checked 2026-11-20)
  4. Understanding your business lease — Federal Economic Development Agency for Southern Ontario (checked 2026-11-20)
  5. Comptroller's Handbook: Commercial Real Estate Lending (version 2.0, March 2022) — Office of the Comptroller of the Currency (checked 2026-11-20)

Educational disclaimer

Educational content only. This is not legal or financial advice. Lease terms vary by building, state and province, so have a lawyer read a commercial lease before you sign it.